27-08-2024, 01:10 PM
(This post was last modified: 27-08-2024, 01:13 PM by Bunnie. Edited 1 time in total.)
Hi,
concerns Octavia ii 1.6 FSI 2008
The error message from VCDS is the intake regulator flap is stuck.
When I shortcut the solinoid, which controls the vacuum, by connecting the tubes, the actuator does move.
With the solinoid installed it does not.
The voltage on the solinoid is ±10
when disconnected also no movement.
How can I test that solinoid?
I've noticed the 3rd cilinder is not as hot as the others. It misfires. Could be that regulator flap. No?
switched the sparkplugs and the coils: no change.
Maybe it is something in the injection system. No?
grtz Bunnie
concerns Octavia ii 1.6 FSI 2008
The error message from VCDS is the intake regulator flap is stuck.
When I shortcut the solinoid, which controls the vacuum, by connecting the tubes, the actuator does move.
With the solinoid installed it does not.
The voltage on the solinoid is ±10
when disconnected also no movement.
How can I test that solinoid?
I've noticed the 3rd cilinder is not as hot as the others. It misfires. Could be that regulator flap. No?
switched the sparkplugs and the coils: no change.
Maybe it is something in the injection system. No?
grtz Bunnie
![[-]](https://mhhavto.com/images/MHHAVTO/collapse.png "[-]")
