
![[Image: VCDS.jpg]](https://i.ibb.co/NtsZ1Sc/VCDS.jpg)
VCDS 25.3.0 En
Date of Release : 2025
System requirements : Windows 7,8,10
Interface language : English
Description : For laces on ATMEGA162 hex v2.
NECESSARILY!!!
add the line "127.0.0.1 update.ross-tech.com" without quotes to the "hosts" file at "C: \ Windows \ System32 \ drivers \ etc"
Code:
How to install VCDS in the PC
This cable suggests not using the internet, official software usage can often be blocked.
a. Turn off antivirus such as AVG, McAfee, etc.
b. Disable Windows Defender
c. Block vcds on the firewall (PC firewall is not turned off).
Installation Guide:
1. Install VCDS-Installer.exe Step by Step (If your system is 64-bit, you must install 32-bit to 64-bit)
2. If the installation was successful, please do not run the vcds software and delete the shortcuts for the computer desktop VCDS version.
3. Copy the CD program VCDSLoader.exe into the installation folder (C: Ross-Tech / VCDS) and create the shortcut to your desktop.
4.First time to plug cables into the PC, wait a while to run VCDSLoader.exe. Click Options to run the self-test, and then click Save Data.
5. Turn off all vcds software, plug in your car, and run VCDSLoader.exe again.
Note: If you need to unplug your antivirus, release is original software, you will need to use VCDSLoader.exe to not simply block cables.
Mhhavto.com
zentasuken
UPDATES:
> Added Loader x2

> Added VCDS 25.3.0

> Added Last Version VIIPlusLoader-08.025.5-FULL-Installer

> Added VCDS 22.10.0 with two Loaders (coding) for Atmega162
If You Need Zip Password : mhhavto.com
Code:
Instructions for installing Loader V9.2 for VCDS 22.10.0:
1. Download VCDS 22.10.0 from official Ross-Tech!
2. Run VCDS-Release-22.10.0-Installer.exe
3. Install by following the setup wizard
3.1. If you're on Win 8.1/10 - select "Fix Windows HID..."
3.2. If you're on 64-bit Win - select "Install 32-bit EXE on 64-bit System"
3.3 Deselect "Create Start Menu Shortcut"
3.4 Deselect "Create a Desktop Shortcut"
4. Deselect "Run VCDS Release 22.10.0" at the end of the install!
5. Download Loader_v9.2.zip from the link above
6. Extract Loader_v9.2.zip
7. Navigate to Loader_v9.2
(to test or re-flash your cable - check instructions below)
8. Copy VCDSLoader.exe to C:\Ross-Tech\VCDS
9. Launch VCDS 22.10.0 only by using VCDSLoader.exe!
9.1 Create a shortcut on your desktop for VCDSLoader.exe
Instructions for testing & flashing your HEX-V2:
Before continuing check if the cable uses ATmega162 chip! Others are not supported
1. Plug in your cable into USB & CAR! (or 12V source)
2. Navigate to VCDSLoader_v9.2 (downloaded from the link above)
3. Launch VAGCOM_HWType.exe
4. Click "Read"
4.1. If your cable has the bootloader unlocked - the tool will show that it's enabled
5. Launch VAGCOM_EEWriteLang.exe
6. Select "English" (should be selected by default)
5.6. Click "WRITE"
You can test your cable now by keeping it plugged into your car and launching VCDSLoader.exe
1. Click "Options" -> Leave "USB" Selected -> "Test"
2. If the test was successful - Click "Save"
3. You should be able to connect to your car and view/code!
mhhavto.com - zentasuken